


Garage Doors · Brampton
Springs & Hardware
Counterbalance, track, roller, cable, and hinge work.
Call now · open 24/7(289) 901-2822Which one do I need?
- The door shudders as it rises, worst where the track bends from vertical to horizontal.Garage Door Roller Replacement
- After a cold night the bottom seal had frozen to the slab.Garage Door Hinge Replacement
- The horizontal rail toward the back of the garage sags noticeably.Garage Door Track Repair or Replacement
- The cable has wrapped itself around the shaft above the door instead of sitting on its drum.Garage Door Cable Replacement
- One side of the door sits higher than the other in the tracks, and a lift cable is hanging slack or has jumped off its…Torsion Spring Replacement
- Open the door by hand and it drifts back down on its own, a little at first and then all at once.Extension Spring Replacement
Springs
Springs & Hardware
Think of the spring system as the door's counterweight. Torsion springs on a shaft above the opening, or extension springs stretched beside the horizontal tracks, hold most of the weight so the opener only guides. We keep that counterweight right.
Bigger photo, sooner job: Emergency Book soon Plan ahead
Book soonGarage Door Roller ReplacementThe door shudders as it rises, worst where the track bends from vertical to horizontal.
Book soonGarage Door Hinge ReplacementAfter a cold night the bottom seal had frozen to the slab.
Book soonGarage Door Track Repair or ReplacementThe horizontal rail toward the back of the garage sags noticeably.
EmergencyGarage Door Cable ReplacementThe cable has wrapped itself around the shaft above the door instead of sitting on its drum.
EmergencyTorsion Spring ReplacementOne side of the door sits higher than the other in the tracks, and a lift cable is hanging slack or has jumped off its drum.
EmergencyExtension Spring ReplacementOpen the door by hand and it drifts back down on its own, a little at first and then all at once.
Book soonGarage Door Balance AdjustmentSomeone replaced the springs a while back and the door has bounced at the top ever since.
Which fix fits?
IfA car clipped the track and it is bent near the floor.
ThenTrack section repair or replacement.
A bent lower track binds the rollers on every cycle; straightening or a new section restores clean travel.
IfA hinge has cracked and the panel flexes as the door moves.
Hinges are numbered for their position on the door; the right one keeps the section aligned.
IfThe rollers wobble in the track and the door shudders.
Worn bearings and stems let the roller wander; a new set tracks true.
IfYour garage is detached and has no side door.
The release only earns its keep on a door that behaves once it is free of the opener, so the visit starts with the door closed and a balance test rather than with the handle.
Not the springs?
Open 24/7
Request a visit
Describe what you noticed
Call now · open 24/7(289) 901-2822- On-site assessment preferred
- Same fees day, night or weekend
- 22 years in business


